Description
Flockator is a tool for obtaining artificial grass cover on large-scale models, dioramas and miniatures. The procedure for working with a floctor is as follows:
- artificial imitation grass cover (floc) is loaded into the hopper of the flocator;
- the place where there will be an imitation of a grass cover is thickly covered with diluted PVA glue.
- the clamp located on the free contact of the flocator, a piece of copper wire or a similar piece of other conductive material is inserted, and this whole structure is installed in the applied layer of liquid glue;
- the floctor is turned on;
- with the sieving movements of the flocator at a distance of about 5 cm, grass imitation is sown from the hopper onto the adhesive layer.
High electrostatic voltage between two contacts of the floctor is provided by the almost vertical position of the artificial grass blades in the applied coating.
After the adhesive coating has dried, the remains of the preparation are removed from the model
