RESIN RADIOACTIVE WATER – 2 COMPONENTS EPOXY RESIN 180ML

Contents: 180 ml (120 resin + 60 hardener). Includes 2 syringes.

This is a two-component, low-odor, colored resin designed to simulate radioactive and toxic water in decorations, dioramas, etc.
Two-component epoxy resin with low odor. Resin and hardener are supplied in separate bottles with dispensing nozzles. The delivery set includes two syringes.

Mixing ratio 2:1. The curing process depends on the resin layer and ambient temperature and usually takes about 24 hours.
The components should be thoroughly mixed by stirring the mixture. It is recommended to avoid stirring during the process to avoid the formation of air bubbles that may become trapped. Dispense in an enclosed area with no cracks to retain liquid. Recommended thickness up to 5 cm.