STANDING WATER (2 COMPONENTS RESIN)

AK8231 two-component color resin with low odor, designed to simulate standing water in scenery, dioramas, etc.
Resin and hardener are supplied in separate bottles with dispensers. There are two syringes in the box.
The mixing ratio is 2:1. The curing process depends on the resin layer and the ambient temperature and usually takes about 24 hours.
The components should be thoroughly mixed by stirring the mixture. It is best to avoid stirring during the process to avoid entrapped air bubbles.
Pour into an enclosed space without gaps to contain the liquid. The recommended thickness is up to 5 cm.