Masking Sol R (20 ml)

Liquid mask "MASKING SOL" - can be applied, cut and removed.

It is a water soluble product so when it thickens during use it can be diluted with water for long term use.

* Apply MASKING SOL where needed, evenly with a brush.
* After drying for 20-30 minutes becomes a transparent film.
* Carefully cut off unnecessary parts with a designer knife, etc., leaving masked parts, and then apply paint.
* When the paint is completely dry after painting, remove the MASKING SOL.
* MASKING SOL is water soluble, so rinse your brushes with water.